If the Live Grid is in focus when a Drummer track is created, a Drummer cell is created. When a currently playing cell in the Live Loops grid is duplicated in the same row, playback is switched to the duplicated cell. Adjusting a Live Loops cell length to be longer than the current Loop length during playback no longer causes the cell to be stuck in play.
Live Loops cells containing Pattern regions now play back in time consistently. Copying Zones from one layer to another no longer also copies their group. Note labels are now created consistently for all slices when creating a Quick Sampler instrument in Sliced mode. Automation Faders are no longer unexpectedly set to 0 db when released in Touch Relative mode. The Eraser tool now reliably deletes automation points.
Enabling the bypass button for automation in the channel strip now dims the automation data instead of hiding it. Fixes an issue where dragging selected automation points to the left in grouped tracks can cause an unselected point just before the leftmost selected point in the grouped tracks to be deleted.
Fixes an issue where setting an unselected track to Automation Trim mode could set the selected track to Trim mode. Fixes an issue where Logic could output a burst of noise with certain extreme automation settings of the High Cut parameter in Channel EQ. Region-baseed automation no longer plays back in muted take regions. Snap behavior when dragging Region-based automation points has been improved.
Automation is now reliably chased and displayed in the track header control when playback is started at any point in a project. The tooltip when editing automation points now reliably displays below the cursor. It is now possible to record automation with regions on the main track of a Track Stack. Automation written for a Surround Panner with stereo input now writes automation for Angle, as expected.
Multiple selected faders now maintain their same relative positions when adjusting one of them after automation has been enabled, disabled, and then re-enabled.
CC data at the beginning of a region or Live Loops cell is now reliably triggered when playback is started at the region start position. Pitchbend data is now chased reliably. Fixes and issue where Chase occasionally generates unexpected Sustain Off messages when adjusting other controls during playback. Sustain messages are now chased correctly if the Playhead is moved during playback.
Region-based Automation is now chased reliably. Chase now properly picks up events from looped regions. Regions with Clip Length enabled no longer cause unexpected notes to be chased at the start of playback.
Chase for MIDI messages has been improved. Note events at the start of a region are no longer chased if the left corner of the region starts after the note on. Track Stacks Shift-clicking to select multiple tracks no longer causes tracks inside of closed Track Stacks to be selected. Fixes an issue where tracks with stereo inputs enclosed in Summing Stacks could change to No Input when loaded as part of a saved Patch.
Resolves an issue that prevented Track Stack overview regions from being selected in certain cases in which the Track Stack contained aliases of audio regions. Track Stack patches now display the track name that was saved with the patch.
Sustain pedal events now work reliably with all sub-tracks of a Summing Stack in cases where one or more of the tracks has a Key Limit set. Dragging a region or loop onto a track within a Track Stack now automatically loads inactive plug-ins on the main track of the stack. Dragging main tracks containing nested Track Stacks to different positions in the Track Header no longer causes the dragged tracks to be unexpectedly added to other Track Stacks or to disappear entirely.
New tracks created in a Summing Stack are placed immediately below the currently selected track. Flattening a Take Folder with an active Comp no longer causes Quantize to unexpectedly switch off.
Fixes an issue where the Reset All Flex Edits command on a set of Grouped tracks in Slicing mode could throw the regions out of sync with one another. Grouped tracks containing flexed takes takes now remain in phase when the number of transients in a Quantize referenced track is changed.
Fixes an issue where audio regions set to Flex: Mono mode could sometimes exhibit crackling noises after the region borders are adjusted. Text now reliably remains visible when typing in parameter values for controls in Alchemy. The Waveform display in the Convolution Reverb no longer disappears if an effect in a prior slot is dragged to a later slot. Moving a Waveshaper instance to another slot no longer causes other instances of Waveshaper to be added.
Fixes an issue where saving an edited version of an Alchemy factory preset could create an unnecessary copy of AAZ file.
Plug-ins The Goniometer display in the Multimeter plug-in now continues to show output on Retina displays when receiving stereo white noise. Enabling True Peak Detection on one channel of the Limiter or AdLimiter plug-in in Dual Mono mode no longer puts the left and right channels out of phase with one another. The disclosure triangle for advanced plug-in parameters is now available when the Advanced Tools preference is not enabled. The Peak Hold indicators in the Level Meter and Multimeter plug-ins no longer freeze when the level is reduced during playback.
A Software Instrument plug-in window that is in Link mode and minimized no longer blinks when an audio track is selected. Enabling True Peak Detection in the Adaptive Limiter plug-in no longer causes the overall output level to be unexpectedly reduced. On Mac computers with Apple silicon, switching between channels on dual mono instances of Audio Unit plug-ins no longer causes the plug-in display to briefly flicker. The signal now remains in phase when using the Grit or Tubeburner pedal modules in parallel on the Pedalboard.
Fixes an issue where the cutoff filter in Retro Synth could sound different after several consecutive presses of the same key. Audio Unit plug-ins with square windows now display properly on Mac computers with Apple silicon. Logic now properly migrates instances of Kontact 5 to Kontact 6 after Kontact has been updated on the computer.
Resolves an issue where IRs in Space Designer could be unexpectedly truncated after the project sample rate is changed. Mixer Fixes an issue where double-clicking on the Surround Panner to open a floating pan window occasionally leads to unexpected changes to the pan position. Selecting multiple channels in the Mixer using the Command or Shift keys now works consistently. Plug-in insert slots now show an indicator when plug-ins are using a sidechain input. Setting the channel strip in the Main window inspector to Surround output while the Smart Controls view is showing EQ on the Output no longer causes all insert slots on the Output to be filled with Channel EQ instances when the left channel strip is switched back to Stereo.
The Mixer now reliably updates to show that all effects plug-ins have been removed after the Remove All Effects Plug-ins command is used. It is now possible to change the Automation Mode for multiple channels in the Mixer that are not assigned to tracks in the Main window.
Groups Group settings now offer an option to create a default set. Groups in tracks with Track Alternatives are now maintained properly when a Take folder is disclosed on one of the tracks in the group. Audio regions on grouped tracks whose anchors are not at the region start point are no longer unexpectedly selected when other non-overlapping regions in other tracks in the groups are selected.
It is now possible to select a region on a track assigned to a group without also selecting overlapping regions on the same track. Drummer now outputs sound when the Vintage Brushes kit is set to play only from the percussion section in the Drummer Editor.
Fixes an issue where clearing all Pads in an instance of Drum Machine Designer could clear plug-ins from shared Auxes associated with the Drum Machine Designer instance. Saving a patch based on a new instance of Drum Machine Designer on a track with a custom track name now uses the track name by default. Loops placed on the main track of a multi-out Drum Machine Designer track stack now play in sync. Drum Machine Designer sub-tracks can now be sorted.
Subtracks for instances of Drum Machine Designer now reliably show icons when the toggling the stack in the Mixer. The Fill Lock setting is now preserved when a Drummer region is copied. Takes and comping Using Quick Swipe comping from right to left to close a gap between comp segments in a Take no longer causes the entire Take to be unexpectedly be selected in the comp.
The Audio File Editor now displays automatically generated Take names as expected. Fixes an issue in which Comps in Take Folders could still be edited on tracks with Track Protect enabled.
Fixes an issue where editing Quick Swipe Comping in an audio Take folder could reset fade lengths. It is now possible to split multiple selected takes in a disclosed Take folder at the same time.
Splitting or copying Take regions that have been renamed now appends a number to the name of the new segment. New Take regions created by splitting existing Take regions now show up immediately in the Project Audio window. Region solo now works for selected Quick Swipe comps in Take folders. Take Folders recorded over a tempo change are now the correct lengths. Track Alternatives Option-drag copying of a region while inactive Track Alternatives are visible no longer leaves the bottommost inactive alternative selected.
Fixes an issue where a region exported from a take folder within a Track Alternative can cause the Track Alternative to not work correctly. Recording MIDI to a track showing inactive track alternatives no longer creates aliases on the inactive alternatives.
Dragging an inactive track alternative to the area below the last track in the Tracks Area now creates a new track at the expected location and places the region there. A Track Alternative created by Option-dragging an inactive Track Alternative below itself is now fully available in the Track Alternatives menu.
Fades When a crossfade is edited, the right side of the fade now visibly updates as expected. Moving the anchor for a region in a Smart Tempo Multitrack Set no longer forces the region to be re-bounced. Sound Library It is now possible to use an alias to refer to sound library content manually moved to a non-default location. The Sound Library can now be relocated to volumes on Box.
Choosing an individual Drum Machine Designer Kit piece from the patch library no longer resets the volume of a selected Software Instrument track. The Loops Browser now displays Major and Minor key signature modes. Sorting by tempo in the Untagged Loops area now works as expected. Content The setting to enable Patch Merging in the Patch Library is now remembered when the library is closed and then reopened. The Library now reliably displays the full path for all content.
The Close button in the Essential Sounds download window now closes the window without stopping the download. It is now possible to filter the Sound Library to show patches from specific sound packs. When importing Music XML files, Logic now asks whether to import the tempo map or keep the current tempo.
Drummer regions are no longer created to MIDI regions when importing a Drummer track from another project. Export and bounce It is now possible to bounce a region to a selected audio track that already contains a region that starts at the bounce position. A progress bar now displays when converting multiple audio files to a compressed format in the Project Audio window. Bounce in Place now includes content before position 1 1 1 1 in a project. It is now possible to bounce a region in place to a selected track when the project and region both start at 1 1 1 1.
Add to Apple Loops Library and Export now generates a 24bit audio file. Audio files exported from a project with a disclosed Take folder now contain tempo and marker information as expected. MIDI events in regions retain their correct positions when exported as MIDI files from projects with start position earlier than 1 1 1 1. Exporting audio from an extremely long movie now works. The Playhead now reliably returns to the original start position after a bounce between locators is performed.
Auto Sampler Fixes an issue where Auto Sampler could unexpectedly truncate some notes while sampling when they include delay taps. Fixes an issue in which Auto Sampler sometimes would get stuck for a long time recording some notes. The key command to toggle the metronome now properly shows the Metronome Click: Off notification when the metronome is toggled off.
The Key Commands editor now resets any selections when it is closed and re-opened. Unpacking folders and Take Folders is now performed with the same key command. The Toggle Track Record Enable key command now works when applied to a group that contains an even number of tracks. Section headers in the Key Commands window now always remain visible.
Shift-clicking the lower left corner of a Global Track now resets its height, just as with other tracks. Impulse Response Utility Removing an audio device from the system not being used by Impulse Response Utility no longer causes it to lose connection to the audio device it is using.
Selection-based Processing Selection-based Processing now works on Take folders. Smart Controls Smart Controls for the Tresonator patch are now available. Score Rubberband selecting lyrics or text in page view no longer selects notes in other staves.
Beams now draw correctly at all zoom levels. User-created Text Styles can now be deleted from a project. Notes are now pasted to the correct position in the Score editor in projects that start on a beat sub-division. Inserted notes in the Score now immediately display correctly at high zoom levels. The Event Float window now opens the first time a note is double-clicked in the Piano Roll.
The function to trim all selected notes to the same position in the Piano Roll now works reliably in all projects. The Event List editor now properly updates to display newly loaded Articulation Sets. The Automatic lane in the Step Editor now updates properly when note data is pasted or transposed in the editor. The Transformer object in the Environment now works properly with bit Pitch Bend data.
Both notes created by splitting a muted note in the Piano Roll remain muted. Undo Undo now works for parameter changes in the Mapped Instrument editor.
Performing Undo after creating a Software Instrument track no longer causes unexpected changes besides the removal of the instrument track.
Undo now works for routing changes applied to stomp boxes in the Pedalboard plug-in. Changes to the Surround Panner now create Undo steps. Changes to Mixer channels with Record Automation with Regions enabled now create undo steps. Video Movie audio is now muted when opening a project that has been saved with a floating Movie window open. If the frame rate of a movie is changed while importing, and the audio is not imported as a separate track, a blue frame indicating the video contains embedded audio is now displayed in the global track as expected.
Videos in saved projects now open in the correct aspect ratio after a project containing a video with a different aspect ratio has been opened. Changes to the transposition value of the keyboard in Logic Remote are no longer reset to 0 when a plug-in or plug-in preset are loaded in the channel.
When an Alchemy track is created using Logic Remote, the Alchemy presets are now shown as expected. Logic Remote now reliably shows the currently focused tracks when a group of tracks is selected in Logic. Control surface buttons now reliably reflect the states of key commands assigned to them. Control surfaces now update to show the status of Mute and Solo buttons when a Step Sequencer row is selected. MIDI device scripts that contain an image of the device no longer show a generic image for the device in Logic.
Logic now correctly installs support for a connected Launchpad if a Mackie Control device is already installed. Adding additional subtracks to a Multi-output Software Instrument in the Live Loops grid no longer creates unexpected empty tracks between the output track and newly created subtracks if a Novation Launchpad is connected. The Playhead and LCD clock display now reliably show the correct position when the cycle zone is moved while playing. The Playhead now shows the correct position when playing back a very short cycle zone at high zoom levels.
Fixes an issue where moving regions on different tracks at the same time in Shuffle L or Shuffle R mode sometimes creates unexpected gaps.
It is no longer possible to copy regions to frozen tracks. The Metronome Toggle notification now properly indicates the state of the Metronome. The main menu now remains fully functional when the Template Picker window is open. Clicking a file in the File Browser with a mouse no longer leaves previously selected files highlighted. Engaging Track Protect on an armed audio track will now disarm it.
Punch recording in Region Erase or Regions punch mode with a zero length Marquee selection no longer creates unexpectedly long regions. Auto Zoom now works as expected when the Cycle zone starts before the start of an open folder in the currently visible area. Aliases created from Folders now contain all the tracks from the original. Sustain pedal events performed during playback now override recorded sustain pedal events. Text pasted into the Mixer Notes window now properly retains the font and size.
Fixes an issue where deleting inactive Track Alternatives for a track could cause the view to jump to the top of the Main window. The playhead now displays at the correct position when switching from Skip Cycle to Cycle mode while playing. Fixes an issue where option-drag copying a Marquee selected area that encompasses a number of complete regions could truncate some of the resulting copies.
If the sample rate is changed when creating a new project, the new sample rate remains in effect when creating subsequent new projects. META 47 events with values above no longer jump to Sustain events can now be set to more granular values. Engaging record with a single-tick length Marquee zone no longer engages Auto Drop.
MIDI events in track regions are now displayed more consistently at all vertical track zoom levels. Regions remain selected when automation view is turned off. Fixes and issue where the Create Track sheet could unexpectedly come up again after creating a new track. Fixes an issue where Insert Silence could affect automation points before the inserted section of silence. Hyperlinks added in Notes fields now open a web browser as expected. Settings in the File Browser are now retained after the Browser is closed and reopened.
Fixes an issue where the File Browser could unexpectedly show files hidden by the system. Resolves an issue where double-clicking an audio region on a track could select all other regions on the track when Fade Tool Click Zones is enabled. Fixes an issue where freezing a Software Instrument track in Source Only mode could result in a silent audio region.
Resolves an issue where Logic Pro quits unexpectedly when Option-dragging a marquee selection within a folder. Mixer Resolves delay compensation issues for plug-ins that require look-ahead, and for busses containing plug-ins that are side-chained to tracks.
Duplicated tracks based on tracks that have a user-defined default patch loaded are now named correctly. Audio tracks created by bouncing software instrument tracks in place are now named correctly. Editing Fixes an issue where changing Smart Quantize parameters could reset prior edits to note velocities. Improved stability when using Audio Units running natively on a Mac with Apple silicon.
Logic Pro no longer becomes unresponsive when quickly changing presets on the Vintage Organ. Resolves an issue where Logic Pro could quit unexpectedly when renaming Arrangement Markers after a Marker Set has been created Logic Pro no longer quits unexpectedly when Explode Folders is selected for a folder in the Score.
Performance Large sample-based instruments now load more quickly. The playhead no longer appears to be stuck when playback is started after the computer wakes from sleep. Performance is improved in large projects in which the Console 1 Lua script is installed. Automating Smart Controls to modulate Envelope 1 Attack in Sampler now sounds correct when the display shows the value returned to 0. Plug-ins Resolves an issue in which some multi-output Audio Unit software instruments showed more outputs than were actually available.
Performance is improved when streaming audio to Elektron hardware using the Elektron Overbridge plug-in. Mixer The Mixer now displays correctly after Hide buttons on several tracks have been enabled. Content Time Machine volumes can no longer be selected as the destination when relocating the Sound Library. Resolves an issue in which relocating the Sound Library to an external drive was not possible. Automation Automation of toggled parameters for Audio Unit plug-ins now work as expected.
Export and bounce Regions that are bounced in place are now named based on the Track, rather than the Channel Strip. Fades Edits applied with the Fade tool to multiple selected regions now work as expected. Smart Controls Fixes an issue where touching the Limiter level parameter in the Smart Controls can cause an unexpected drop in level.
Track Stacks The names of sub-tracks in a software instrument track stack now display properly. MIDI controllers and control surfaces Resolves several issues with Lua script support for control surfaces. When a Drum Machine Designer track is selected, control surfaces now display the channel strip as Drum Machine Designer instead of displaying the name of the audio plug-in on the first insert slot.
General If the left and right locators are set to the same position and Cycle is enabled, putting Logic Pro into play mode now disables Cycle. Fixes an issue where the playhead might not respond correctly after the Mac wakes from sleep. A highlighted Marquee section is now dismissed after it is Option-dragged to copy the selection.
Marquee selections are now deselected after the Repeat function is used. Fixes an issue where Logic Pro occasionally quit when using older versions of Waveshell. Fixes an issue where Logic Pro occasionally quit when selecting a track automation parameter. Restores the ability to click the transport Play button while a Live Loops cell is in record.
Resolves an issue where Logic Pro could quit unexpectedly when stepping through presets in the Native Instruments Guitar Rig 6 plug-in.
Performance Instances of Ultrabeat now load more quickly. Live Loops Fixes an issue where cells containing files that are a different sample rate than the project play at the wrong pitch until the end of the current loop when the Flex mode is changed. Fixes an issue where Sampler zones could lose their connection to samples when they are edited in the Audio File editor. Plug-ins Fixes an issue where notes hang occasionally in Studio Strings when playing back in cycle mode if the instrument is set to a MIDI channel other than channel 1.
Content The Bass patch now plays as expected. The Vowel Pad patch now plays as expected. Fixes an issue where Catch Playhead occasionally activates when editing notes in the Piano Roll during playback. Drum names in Producer Kits now display as expected in the Piano Roll. The Event List display now updates properly when events are moved.
Export and share MIDI Files exported from regions contain events from the end of the region as expected. Impulse Response Utility Quad audio files dropped into Impulse Response Utility now show the correct channel labels when True Stereo is chosen from the format dropdown.
General Logic Pro no longer shows an error when choosing a different tempo from the Transport if Advanced Tools is not enabled. Fixes an issue where copying a looped region sometimes overwrites subsequent regions in the track.
It is now possible to copy a region that loops to the end of a project over itself in No Overlap mode. Fixes an issue where saved Spotlight searches that include files accessible in the All Files browser in Logic Pro occasionally cause navigation issues.
Stability and reliability Logic Pro no longer quits unexpectedly: When beaming a large number of notes in the Score. When making long recordings into Quick Sampler. When stepping through ChromaVerb presets.
Occasionally when setting color display options in the Piano Roll. Logic Pro no longer hangs: When the Paste Multiple command is applied in the Score editor if the clipboard is empty. Resolves an issue where Logic Pro could unexpectedly quit when reversing the direction of a Live Loops cell during playback.
Fixes an issue where Logic Pro occasionally quits unexpectedly when moving plug-ins to different positions in the Mixer while using VoiceOver. Resolves an issue where Logic Pro sometimes quits unexpectedly when clicking in the patch library immediately after saving a project. Resolves an issue where Logic Pro could occasionally quit when selecting the Additive tab in Alchemy after creating a new track from a sample. Resolves an issue were Logic Pro could quit unexpectedly when multiple projects are open.
Logic Pro no longer shows an error when trying to create a Template in certain rare cases. Resolves an issue where Logic Pro could quit unexpectedly when dragging a repeat symbol to the score. Performance Creating a Drum Machine Designer instance from an audio file containing multiple slices is now much faster. UI performance when editing Flex Pitch on long audio files is improved.
Projects named with the file extension in uppercase now open as expected. Opening and closing Logic Pro plug-in windows no longer causes memory usage to increase. Resolves an issue where Logic Pro occasionally hangs when certain video files are open in the project. Studio Strings now play back smoothly in cycle mode when there are large tempo changes. The Audio Cell Editor is no longer empty after joining two cells containing audio regions.
Fixes an issue where audio regions transferred from the Tracks area to cells in the Live Loops grid are occasionally transposed unexpectedly. Deleting the last Live Loops cell on a track now causes playback to automatically switch to the Tracks area.
The Slip and Rotate commands in the Live Loops cell Piano Roll editor now work as expected when the cell is not selected. Dragging a Marquee selection from a Live Loops cell Audio editor to the Tracks area now correctly sets the editor view to the Audio Track editor.
Stopping recording of a Live Loops cell no longer stops playback of all other cells when the playhead has reached the end of the project timeline. The Repeat Once command now correctly overwrites content in the Live Loops cell to the right of the currently selected cell.
Dragging a scene in the Live Loops grid no longer causes the view to scroll to the bottom. Live Loops cell editors no longer display the Global Tracks area in cases where Global Tracks are not functional. Step Sequencer pattern cells now take on the color of the track. Select by Transient in the Audio Cell Editor now reliably selects all transients in the cell. The Copy to Live Loops command now populates the currently focused, or first following empty scene rather than the first empty scene in the grid.
Live Loops grids now play and respond as expected after saving as part of an untitled project on systems using UAD Apollo interfaces. Copying selected Markers to the Live Loops grid now sets Cell lengths to the distances between Markers in cases where the Marker lengths are 1 clock tick.
A cell moved to a different track and then back while playing no longer speeds up briefly. Pasting a Marquee selection into a Live Loops cell now includes any blank space that is part of the selection. Fixes an issue where copying multiple contiguous regions from the Audio Cell Editor to the Tracks Area sometimes results in unexpected overlaps between regions.
Changing the tempo of a cell now consistently works with audio files that have had the original recording tempo removed. Option-clicking Live Loops cells now toggles their queue status.
The Live Loops Cell contextual menu now includes recording settings. It is no longer possible to inadvertently select a cell in the Live Loops grid and a region on the same track in the Tracks area.
Audio files added to the Audio Cell editor are no longer placed one bar to the left of the position clicked with the pencil tool. Cells containing flattened take folders now play back reliably at the correct tempo. Cutting a portion of the start of Take region in the Audio Cell editor no longer removes the same section from other takes in the Take folder. Fixes an issue where edits applied to individual Takes in the Live Loops Cell editor are occasionally applied to the Take folder.
Pattern cells in the Live Loops grid can now be reliably deleted after performing Undo in the Step Editor. Live Loops cell recording behavior is no longer affected by the cell playback mode.
Live Loops cells created by dragging a marquee selection of audio regions to the grid now play back in sync and at the correct tempo. When a flexed cell is copied to an empty track, the track now reliably switches to the flex mode of the copied cell. Cell or scenes in the Live Loops grid can no longer be inadvertently dragged when tools other than the pointer are assigned. Pattern cells in the Live Loops grid now reliably continue to respond to automation after a cycle jump.
When non-crossfaded regions overlap in a Live Loops cell, the first region now stops playing when the second begins. The Live Loops grid now automatically scrolls to show scenes selected using the Previous or Next Scene key commands.
Fades on reversed cells are now rendered properly when a Performance recording is created. It is now possible to stop and retrigger an individual cell without stopping playback entirely. Scrubbing in the Sampler zone editor is now possible when the Loop Range encompasses the entire sample. In Sampler or Quick Sampler a Mod Matrix slot can now be created by right- or Control-clicking a target parameter and choosing a source. Sampler now retains the view of modules configured by the user when re-opening the plug-in window.
An audio file dragged to a Zone in an empty instance of Sampler is now immediately displayed in the Zone editor. Sampler now reliably loads the correct settings for bundled instruments. Performing Undo after inserting a Slice marker in Quick Sampler while zoomed in no longer causes the view to unexpectedly zoom out. Exchanging a sample in a gain-optimized Zone now optimizes the gain for the newly added sample. The maximum zoom in the Sampler Zone Key editor has been increased. When working in Slice mode in Quick Sampler, the active slice marker is now displayed on top of the sample start marker.
Multiple clicks in an empty zone panel in Sampler no longer triggers multiple file load dialogs. There is now a Preview audio button in all modes in the Quick Sampler window. There is now a command in the Sampler Zone edit panel to add a new zone. Selections made in the Zone list are now maintained when the cursor is moved into the Waveform display area.
The waveform in the Sampler Zones panel now updates when switching zones with the keyboard while in Round Robin mode. Dragging a stereo file to the Track Header to create a Quick Sampler instrument no longer creates a mono instance.
Automatic pitch detection for Sampler and Quick Sampler now consistently detects the correct pitch. Sampler now sorts Zones numerically as well as alphabetically. It is now possible to edit the Velocity settings of multiple zones that belong to different groups in Sampler.
The Command key can now be used to temporarily override the snap value in the Quick Sampler grid. File names are now visible in the Sampler Zone Editor. Sampler now retains changes to the Waveform Zoom setting when the plug-in window is closed and then reopened. Double-clicking a Zone in the mapping area now opens the Zone Panel. Round Robins created from a selection of Groups now play in the same order as the Groups.
Saved patches in Sampler that use the default sine wave now play back correctly when recalled. Performing undo after exchanging a kit piece or loading a patch in Quick Sampler now immediately updates the waveform display.
Audio file names can now be edited in Sampler. The accuracy of slice positions in Quick Sampler is improved. Edit Key Labels in Sampler now works as expected. Resolves an issue in which it was sometimes not possible to drag an audio file to a position between two existing Zones, even if there was room. The Save As command in Sampler no longer overwrites the original instrument preset. Sampler now plays audio files on which Undo has been performed after editing in the Audio File editor.
Sampler now successfully loads EXS instruments with filenames longer than 57 characters. The volume of Quick Sampler presets is now more consistent when Optimize Gain is enabled. Loop data written into audio files by Sampler or Quick Sampler is now used when the files are loaded as Original into new instances of Sampler or Quick Sampler.
Zones now play back edits performed on their audio files in Audio File editor. Sampler now automatically finds all missing files in a folder once the first missing file in that folder has been located.
The volume setting for newly created Zones is now consistently 0 dB. Apple Loops edited in Quick Sampler are now copied to the Project folder as expected. Canceling a Zone per File import in Optimized mode now instantly stops the operation. Auto Split when creating an Optimized Sampler instrument now works reliably with short, percussive sounds.
The accuracy of detection has been improved for audio recordings that contain soft transients or short duration fundamental frequencies when creating optimized Sampler instruments using Split at Silence.
At least it works! Posted on Mar 29, PM. Page content loaded. Not directly; you may be able to download an older version of an application by getting the current one and then trying to redownload it on a computer running an earlier OS. If needed, you can temporarily install El Capitan or Sierra onto a second partition or external drive. Mar 4, PM.
I wouldn't be opposed to purchasing the newest version if it gave me access to the older versions, but is there any confirmation that this would work? I know that traditionally in the music software world, this usually isn't the case, and if it's anything like Apple's operating system downloads, I doubt this would work. Mar 18, PM. I just did that, to troubleshoot my low latency problems. On After I upgraded to You need to be on macOS Mar 18, PM in response to krogalon In response to krogalon.
BUT: I bought it already years ago. But for installing macOS High Sierra on Windows, which you definitely can, there are two ways to do it. The macOS High Sierra This update:. Improves compatibility with certain third-party USB audio devices. Improves compatibility of Braille displays with Mail. In this article, we shared macOS High Sierra Then select the Partition option.
Sophisticated tools for professional songwriting, editing, and mixing are built around a modern interface that Apple I tested OS X Download for Mac OS X Logic Pro X You can feel the excitement in the air every time a new version of Logic is released, and this time is no different. The latest free update to Logic includes a Logic Pro X
0コメント